Blog posts of '2019' 'August'

Putting in the ribbon: slightly remove the ribbon-transferring wheel nut, outer reel, and the pare core of the ribbon. Put in a new ribbon, and then install the outer reel and the ribbon transferring wheel nuts in order. Wind the ribbon in order according to the figure, and finally stick the ribbon to the paper sleeve of the ribbon collecting wheel with an adhesive sticker.

The preparation process of solid preparations is inseparable from the granulation process. This process processes materials such as powder into pellets of a certain shape and size to improve the fluidity of the powder and prevent segregation of the components.

This YK60 machine is packed in the wooden case. When you disassembly the wooden case, just put the machine in the appropriate place and flat pad so that you can use it.

First, respectively install 2 pieces of organic glass tray on two round fixing block. After that, insert the slotted fixing block onto the tray mandrel, then pull the green O-rings into the slot of the fixing block, and finally, fix the fixing block with screws.

This vibrating granulator makes use of the rolling motion of rotating barrel to granulate the wet powder materials into granule by sieve. It can also be used to crush agglomerate materials into small granules directly.

The machine is electromechanical integration equipment. In order to avoid the equipment appliance from premature aging and damage, the working environment must remain clean and dry. Also, it is prohibited to use the machine in environment of high humidity, high corrosion, and high dust.

The following are some of the troubleshooting guides that we have sorted out so that the operator can troubleshoot problems with the coater during work.

It is necessary to connect the ground wire before use (The ground wire should not directly use three-phase outlet for grounding, but a safe and reliable grounding wire should have connected separately, to ensure safe use of electricity), and then switch on the power.

Description of all function keys on the touch screen is shown as below.

The technology, in which aluminum plastic composite materials get heated and sealed through electromagnetic induction, is a relatively advanced and popular non-contact sealing technology both at home and abroad.